Custom PFAS Free Sound Permeable Membrane Waterproof For IPX7 Speaker Enclosure
Product Details
| Color: | White | Thickness: | 0.10 – 0.50 Mm |
|---|---|---|---|
| Air Permeability: | Gurley:3 – 30 S/100ml @ 300 Ml | Water Entry Pressure: | ≥ 400 KPa |
| Waterproof Rating: | IP68 | Moisture Vapor Transmission Rate: | 8,000 – 18,000 G/m²·24h |
| Oleophobicity Grade: | ≥ 7 | 90° Peel Strength: | ≥ 15 N/25mm |
| Operating Temperature: | -40°C To +150°C | Size: | Customizable |
| Material Compliance: | PFAS Free | Chemical Resistance: | Corrosion-resistant,Acid-resistant |
| Highlight |
Custom Sound Permeable Membrane,IPX7 Speaker Enclosure Sound Permeable Membrane,PFAS Free Waterproof Membrane |
||
Product Description
Tailored for IPX7-rated speaker enclosures such as portable Bluetooth speakers, outdoor PA systems, and marine audio, this custom PFAS-free waterproof sound permeable membrane delivers powerful audio output while keeping water out. It is available in larger sheet sizes or pre-cut formats to fit speaker grille openings. The non-fluorinated film ensures that your audio product can achieve high waterproof ratings without relying on restricted PFAS chemicals, future-proofing your design for global markets.
Speaker drivers need to move air to produce sound; a completely sealed enclosure without a venting membrane would dampen the speaker cone and distort audio. Traditionally, a PTFE membrane was placed behind the grille. Now, manufacturers want to eliminate PFAS from the bill of materials. However, a membrane for a powerful speaker must handle high sound pressure levels without flapping or tearing, and must not introduce audible distortion even at maximum volume.
We provide a PFAS-free sound permeable membrane engineered with a more open pore structure and reinforced by a thin polyester mesh backing for durability. It allows high air displacement with minimal acoustic resistance. The membrane is hydrophobic up to 1 meter of submersion and blocks sand and dust. Custom shapes can include a perimeter adhesive gasket for direct adhesion to speaker grille frames. Installation can be done manually or with pick-and-place automation.
-
Membrane: PFAS-free polymer on PET mesh support
-
Composite thickness: 0.25–0.35 mm
-
Acoustic resistance: < 50 rayls MKS
-
Waterproof: IPX7 (1m/30min)
-
Max SPL tested: 120 dB without failure
-
Custom size: up to 300 x 300 mm
-
Adhesive: 0.15 mm thick acrylic foam tape
Used in rugged Bluetooth speakers, shower speakers, marine cockpit speakers, outdoor public announcement horns, and communication headsets. It can also serve as a dust cap replacement in waterproof earphones.
The membrane is attached behind the speaker grille. When the speaker cone moves, air flows back and forth through the membrane pores with very low resistance. The polyester mesh provides stiffness to prevent ballooning under high SPL. Water from immersion is stopped at the hydrophobic surface, while the speaker maintains full acoustic output. The design ensures that the resonant frequency of the membrane lies outside the speaker’s operating band.
Provide the speaker’s outer frame dimensions and grille opening geometry. We will design a custom membrane patch that matches the acoustic port area. If your speaker has high excursion, we recommend the reinforced mesh variant. For saltwater exposure, choose our corrosion-resistant adhesive. We can supply prototypes with and without adhesive for AB audio testing.
Q: Will the membrane affect bass response?
A: Properly sized, the membrane adds negligible acoustic impedance, preserving bass. We can simulate the speaker system to confirm.
Q: Can it handle high-pressure water jets?
A: IPX7 is immersion, not jetting. For IPX5/6 jet resistance, we recommend a thicker membrane variant and a protective grille.
Q: Is the mesh visible from the outside?
A: It can be colored black or white to blend with the grille. Custom colors are possible.
Product Highlights
Product Overview Tailored for IPX7-rated speaker enclosures such as portable Bluetooth speakers, outdoor PA systems, and marine audio, this custom PFAS-free waterproof sound permeable membrane delivers powerful audio output while keeping water out. It is available in larger sheet sizes or pre-cut ...
EPTFE Acoustic Vent Membrane Sweatproof For VR Headset Microphone
EPTFE VR Headset Microphone Sweatproof Acoustic Vent Membrane Product Overview This EPTFE acoustic vent membrane is purpose-built for Virtual Reality (VR) headsets, where microphones face constant exposure to sweat, heat, and condensation during physically active gaming and training sessions. The ...
EV Battery Pack Pressure Equalization Vent Bolt Waterproof Breathable Metal Threaded
EV Battery Pack Pressure Equalization Vent Bolt Waterproof Breathable Metal Threaded Product Overview The EV battery pack pressure equalization vent bolt is a critical safety component for electric vehicle battery enclosures. It combines a precision metal threaded body with a waterproof ePTFE ...
Medical Grade EPTFE Miniature Acoustic Vent Membrane For Hearing Aid Devices
Medical Grade EPTFE Miniature Acoustic Vent For Hearing Aid Devices Product Overview This medical-grade EPTFE miniature acoustic vent is purpose-designed for hearing aid devices, where acoustic transparency, biocompatibility, and long-term resistance to cerumen (earwax) and moisture are non...
White EPTFE Acoustic Vent Membrane for Automotive Hands Free Microphone Array
EPTFE Automotive Hands Free Microphone Array Acoustic Vent Membrane Product Overview This EPTFE acoustic vent membrane is specifically designed for in-vehicle hands-free microphone arrays mounted in headliners, overhead consoles, seatbelt assemblies, or integrated into the infotainment system. It ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.