High Airflow Breathable Vent HDPE For Agricultural Sprayer Tanks / Drums D17
Product Details
| Color: | White | Thickness: | 0.10 – 0.50 Mm |
|---|---|---|---|
| Air Permeability: | Gurley:3 – 30 S/100ml @ 300 Ml | Water Entry Pressure: | ≥ 400 KPa |
| Waterproof Rating: | IP68 | Moisture Vapor Transmission Rate: | 8,000 – 18,000 G/m²·24h |
| Oleophobicity Grade: | ≥ 7 | 90° Peel Strength: | ≥ 15 N/25mm |
| Operating Temperature: | -40°C To +150°C | Size: | Customizable |
| Material Compliance: | PFAS Free | Chemical Resistance: | Corrosion-resistant,Acid-resistant |
| Highlight |
Agricultural Sprayer Tanks Breathable Vent,High Airflow EPTFE Vent,HDPE Waterproof Breather Vent |
||
Product Description
The D17 high airflow breathable vent is the optimal pressure management solution for agricultural sprayer tanks, nurse tanks, and large drums used in modern farming operations. Its 17mm HDPE body and high-capacity ePTFE membrane are engineered to handle the intense breathing demands of rapid tank filling from bulk storage, high-volume spraying pumps, and the extreme temperature swings of outdoor agricultural environments. This vent guarantees that sprayer tanks remain structurally sound, free from vacuum collapse or pressure ballooning, while completely blocking dust, rain, pesticide residue, and liquid fertilizer from entering or escaping. Designed for the rugged reality of farm use, it provides season-after-season reliability with zero maintenance.
Agricultural sprayer tanks and drums endure some of the harshest operating conditions. Tanks are filled quickly from high-flow pumps, often from hydrants or nurse trucks, generating immediate positive pressure that must be relieved. During spraying, powerful PTO-driven pumps can empty a 1000L tank in minutes, creating a vacuum that can implode an insufficiently vented tank. These tanks sit outdoors, exposed to full sun, dust storms, and heavy rain. Non-breathable tanks develop pressure locks that disrupt sprayer calibration and flow consistency. Inferior vents can become clogged with dust, chemical crusts, or insects, or worse, allow rainwater in, diluting expensive chemical mixtures and potentially causing environmental contamination if overflow occurs.
The D17 vent is built for this environment. Its high airflow membrane, capable of moving over 2000 ml/min at minimal pressure drop, instantly compensates for rapid filling and emptying. The robust HDPE body is UV-stabilized to withstand years of solar exposure and is thick-walled to resist impact damage from tools, branches, or rough handling. The ePTFE membrane is dust-proof and waterproof, ensuring that no rain or field debris enters the tank, and no liquid chemical weeps out when the sprayer traverses steep terrain. By maintaining near-ambient tank pressure, it ensures consistent sprayer pump performance and accurate chemical metering, while protecting the tank structure from fatigue.
| Parameter | Specification |
|---|---|
| Model | D17 High Airflow Breathable Vent |
| Hole Size | 17 mm |
| Body Material | UV-stabilized HDPE |
| Membrane | High-flow ePTFE (oleophobic, dirt-shedding) |
| Airflow | ≥ 2000 ml/min @ 1 psi |
| Water Entry Pressure | ≥ 80 kPa |
| Temperature Range | -40°C to +120°C |
| Installation | Ultrasonic weld, or threaded adaptor for existing ports |
| Tank Compatibility | 100L to 1500L sprayer tanks, nurse tanks, mix tanks |
| Durability | Impact resistant, UV protected, chemical inert |
-
Tractor-mounted and trailed agricultural sprayer tanks (200L-1500L)
-
Self-propelled sprayer solution tanks and rinse tanks
-
Liquid fertilizer nurse tanks and tender trucks
-
Spot sprayer and ATV sprayer tanks
-
Agricultural aviation (crop duster) loading tanks
-
Vineyard and orchard sprayer tanks
During rapid tank filling, air displaced by the incoming liquid is forced out through the D17 vent’s high-porosity ePTFE membrane at a rate matched to the fill pump, preventing tank pressurization. When the sprayer pump extracts liquid, ambient air is simultaneously drawn through the membrane into the tank, replacing the liquid volume and preventing a vacuum. The membrane’s dirt-shedding outer surface prevents dust and crop debris from adhering and restricting airflow. Its waterproof property means that even during a heavy downpour or when the tank is tipped, no external water enters and no internal chemical escapes.
-
Determine your maximum fill and spray rates: select a vent whose airflow rating exceeds the highest pump rate in your system.
-
Measure the available port size: many sprayer tanks have standardized threaded ports. We offer threaded D17 adaptors to fit common tank bung sizes.
-
Consider the tank’s agitation system: sprayers with vigorous hydraulic or jet agitation increase internal pressure and demand higher airflow.
-
Evaluate chemical exposure: test the vent with your specific tank mix, including adjuvants and surfactants, to confirm membrane compatibility.
-
Q: Can this vent handle the foaming that occurs with some tank-mix adjuvants?
A: The oleophobic ePTFE membrane resists foam penetration. However, severe foam could temporarily reduce airflow. We recommend an internal splash guard for foam-prone mixtures. -
Q: Will the vent get clogged by dust while driving on unpaved farm roads?
A: The membrane’s smooth, non-stick surface and dust-repellent properties prevent dust accumulation. In extremely dusty conditions, an external shield may be added. -
Q: Can I weld this vent into a rotationally molded sprayer tank?
A: Yes, rotomolded HDPE tanks are ideal. The welding surface must be flat and clean. We provide welding guidelines for rotomolded part surfaces. -
Q: Does the vent affect the sprayer’s pressure regulator performance?
A: No, it stabilizes tank pressure, which actually helps the pump and pressure regulator maintain a consistent flow without fighting against vacuum or overpressure. -
Q: Is this vent compatible with aerial application loading systems?
A: Yes, the high airflow capacity meets the demands of rapid loading for agricultural aircraft, ensuring fast cycle times without tank stress.
Product Highlights
Product Overview The D17 high airflow breathable vent is the optimal pressure management solution for agricultural sprayer tanks, nurse tanks, and large drums used in modern farming operations. Its 17mm HDPE body and high-capacity ePTFE membrane are engineered to handle the intense breathing demands ...
EPTFE Acoustic Vent Membrane Sweatproof For VR Headset Microphone
EPTFE VR Headset Microphone Sweatproof Acoustic Vent Membrane Product Overview This EPTFE acoustic vent membrane is purpose-built for Virtual Reality (VR) headsets, where microphones face constant exposure to sweat, heat, and condensation during physically active gaming and training sessions. The ...
EV Battery Pack Pressure Equalization Vent Bolt Waterproof Breathable Metal Threaded
EV Battery Pack Pressure Equalization Vent Bolt Waterproof Breathable Metal Threaded Product Overview The EV battery pack pressure equalization vent bolt is a critical safety component for electric vehicle battery enclosures. It combines a precision metal threaded body with a waterproof ePTFE ...
Medical Grade EPTFE Miniature Acoustic Vent Membrane For Hearing Aid Devices
Medical Grade EPTFE Miniature Acoustic Vent For Hearing Aid Devices Product Overview This medical-grade EPTFE miniature acoustic vent is purpose-designed for hearing aid devices, where acoustic transparency, biocompatibility, and long-term resistance to cerumen (earwax) and moisture are non...
White EPTFE Acoustic Vent Membrane for Automotive Hands Free Microphone Array
EPTFE Automotive Hands Free Microphone Array Acoustic Vent Membrane Product Overview This EPTFE acoustic vent membrane is specifically designed for in-vehicle hands-free microphone arrays mounted in headliners, overhead consoles, seatbelt assemblies, or integrated into the infotainment system. It ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.