EPTFE Acoustic Vent Membrane For Shark Fin Antenna Integrated Mic
Product Details
| Color: | White | Thickness: | 0.10 – 0.50 Mm |
|---|---|---|---|
| Air Permeability: | Gurley：3 – 30 S/100ml @ 300 Ml | Water Entry Pressure: | ≥ 400 KPa |
| Waterproof Rating: | IP68 | Moisture Vapor Transmission Rate: | 8,000 – 18,000 G/m²·24h |
| Oleophobicity Grade: | ≥ 7 | 90° Peel Strength: | ≥ 15 N/25mm |
| Operating Temperature: | -40°C To +150°C | Size: | Customizable |
| Material Compliance: | PFAS Free | Chemical Resistance: | Corrosion-resistant，Acid-resistant |
| Highlight |
Shark Fin Acoustic Vent Membrane,Antenna Integrated Mic Vent,Automotive EPTFE Acoustic Vent |
||
Product Description
EPTFE Shark Fin Antenna Integrated Mic Protective Acoustic Vent
Product Overview
This EPTFE protective acoustic vent is specifically intended for the microphone element integrated into shark fin antenna assemblies for telematics, eCall, and voice commands. The antenna housing sits on the highest point of the vehicle roof, fully exposed to driving rain, snow, ice, bird droppings, and automatic car wash rollers. The vent seals the built-in microphone against direct water intrusion while maintaining clear voice pickup for emergency eCall communications and hands-free calls. Its conformable nature fits within the tight, curved internal spaces of the antenna housing without interfering with GPS, cellular, or satellite radio signal reception. The material is highly resistant to UV radiation and ozone, ensuring no cracking or embrittlement after years of rooftop exposure. The vent is a critical safety component, helping ensure that the eCall system microphone remains operational after an accident, even if the vehicle is partially submerged.
Solution
Shark fin antennas integrate multiple functions, and microphone failure due to water ingress is a common warranty issue. A leaking mic port can also allow water into the antenna’s electronics. This EPTFE vent provides a watertight acoustic window that remains functional after pressure washing and immersion. By maintaining a dry microphone cavity, it guarantees that the eCall system’s emergency voice connection works when needed most—following a collision where the vehicle may have rolled or entered water. The solution supports automotive OEMs in meeting EU eCall regulation reliability requirements.
Specifications
| Parameter | Typical Value |
|---|---|
| Material | EPTFE conformable film |
| Thickness | 0.20 mm ± 0.03 mm |
| Waterproof Rating | IP68 (submersion to antenna depth) |
| Acoustic Insertion Loss | ≤ 1.5 dB (300 Hz – 3.4 kHz) |
| UV Resistance | 3000 hours Xenon arc, no mechanical change |
| Heat Resistance | 115°C continuous |
| Conformability | Can be die-cut to curved profiles |
| Adhesive | High-temperature acrylic for ASA/PC |
Application
Shark fin antenna assemblies, stubby antenna modules with integrated microphone, telematics control units with voice input, and external SOS call boxes.
How It Works
The vent is welded or adhered over the mic port inside the antenna housing. Voice sound passes through the microporous membrane to the internal microphone. Water driven into the antenna housing by high-pressure car washes is blocked by the hydrophobic pores. The membrane also prevents dust, insects, and pollen from entering the microphone cavity, ensuring long-term acoustic stability.
FAQ
Q1: Does car wax or ceramic coating affect the vent?
A: Car waxes may temporarily alter the surface energy, but rain and washing remove residues. The EPTFE’s inherent hydrophobicity is a bulk material property and is not degraded by typical car care products.
Q2: Can it withstand brush car washes?
A: The vent is recessed inside the antenna housing and is not in direct contact with brushes. The housing itself provides mechanical protection; the vent handles any water spray that enters through the mic opening.
Q3: Is the vent a field-replaceable part?
A: The vent is an integrated component of the antenna module. Field replacement is not typical; the entire antenna assembly would be replaced if damage occurs.
Product Highlights
EPTFE Shark Fin Antenna Integrated Mic Protective Acoustic Vent Product Overview This EPTFE protective acoustic vent is specifically intended for the microphone element integrated into shark fin antenna assemblies for telematics, eCall, and voice commands. The antenna housing sits on the highest ...
EPTFE Acoustic Vent Membrane Sweatproof For VR Headset Microphone
EPTFE VR Headset Microphone Sweatproof Acoustic Vent Membrane Product Overview This EPTFE acoustic vent membrane is purpose-built for Virtual Reality (VR) headsets, where microphones face constant exposure to sweat, heat, and condensation during physically active gaming and training sessions. The ...
EV Battery Pack Pressure Equalization Vent Bolt Waterproof Breathable Metal Threaded
EV Battery Pack Pressure Equalization Vent Bolt Waterproof Breathable Metal Threaded Product Overview The EV battery pack pressure equalization vent bolt is a critical safety component for electric vehicle battery enclosures. It combines a precision metal threaded body with a waterproof ePTFE ...
Medical Grade EPTFE Miniature Acoustic Vent Membrane For Hearing Aid Devices
Medical Grade EPTFE Miniature Acoustic Vent For Hearing Aid Devices Product Overview This medical-grade EPTFE miniature acoustic vent is purpose-designed for hearing aid devices, where acoustic transparency, biocompatibility, and long-term resistance to cerumen (earwax) and moisture are non...
White EPTFE Acoustic Vent Membrane for Automotive Hands Free Microphone Array
EPTFE Automotive Hands Free Microphone Array Acoustic Vent Membrane Product Overview This EPTFE acoustic vent membrane is specifically designed for in-vehicle hands-free microphone arrays mounted in headliners, overhead consoles, seatbelt assemblies, or integrated into the infotainment system. It ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
