Dustproof Acoustic EPTFE Vent Membrane For Tablet Computer Mic
Product Details
| Color: | White | Thickness: | 0.10 – 0.50 Mm |
|---|---|---|---|
| Air Permeability: | Gurley:3 – 30 S/100ml @ 300 Ml | Water Entry Pressure: | ≥ 400 KPa |
| Waterproof Rating: | IP68 | Moisture Vapor Transmission Rate: | 8,000 – 18,000 G/m²·24h |
| Oleophobicity Grade: | ≥ 7 | 90° Peel Strength: | ≥ 15 N/25mm |
| Operating Temperature: | -40°C To +150°C | Size: | Customizable |
| Material Compliance: | PFAS Free | Chemical Resistance: | Corrosion-resistant,Acid-resistant |
| Highlight |
Dustproof Acoustic Vent Membrane,Tablet Computer Mic EPTFE Vent,Tablet Microphone Protection Vent |
||
Product Description
EPTFE Dustproof Acoustic Vent Membrane For Tablet Computer Mic
Dedicated to tablet computers, this EPTFE dustproof acoustic vent membrane focuses on defending against fine particulate ingress that is prevalent in tablet usage scenarios—classrooms, kitchens, construction sites, and healthcare facilities. Tablets are often used without protective cases, leaving microphone holes exposed to flour, sawdust, pollen, and textile fibers. The membrane’s pore structure is optimized for ultra-high dust filtration efficiency (≥99.9% for particles ≥1 μm) while maintaining extreme acoustic transparency. With a thickness of only 0.12 mm, it integrates effortlessly into the slim bezels of modern tablets and 2-in-1 detachable designs. The membrane is treated with an anti-static coating that repels lint and does not attract charged dust particles, keeping the exterior visibly cleaner. It provides consistent performance across the multiple microphones used for noise suppression and video conferencing, ensuring that tablet users are clearly heard in Zoom calls, voice dictation, and AI assistant interactions.
Tablet microphones are frequently blocked by dust and debris because the devices are laid flat on surfaces, slid into bags, and handled by multiple users. Traditional foam covers act as dust magnets and eventually become clogged, causing a slow decline in voice quality that users may not notice until calls become unintelligible. Our EPTFE vent acts as a permanent, non-degrading filter that traps dust on its outer surface where it can be easily wiped away. The hydrophobic nature also prevents moisture from causing dust to cake and form a paste that blocks pores. Because tablet microphone arrays rely on precise phase and amplitude matching for beamforming, the vent is manufactured to deliver identical acoustic impedance across all units. This guarantees that the tablet’s voice isolation and noise reduction algorithms work flawlessly throughout the device’s life. The membrane also withstands screen cleaning solutions and alcohol-based disinfectants commonly used in medical and educational tablets.
| Parameter | Typical Value |
|---|---|
| Material | EPTFE with anti-static coating |
| Thickness | 0.12 ± 0.02 mm |
| Pore Size (mean) | 0.1 – 0.4 μm |
| Dust Filtration Efficiency (1 μm particles) | ≥ 99.9% |
| Air Permeability (Gurley) | 18 – 28 sec/100ml |
| Acoustic Insertion Loss (100 Hz – 10 kHz) | ≤ 1.3 dB |
| Water Contact Angle | 125° |
| Static Decay Time | < 0.5 sec (anti-static) |
| Operating Temperature | -20°C to +85°C |
| Adhesive | Low-outgassing acrylic for confined spaces |
Tablet computer microphone arrays (2-4 mics), detachable keyboard mics, point-of-sale tablet mics, and medical cart tablets that require frequent disinfection.
The membrane functions as a depth filter with a tortuous pore path. Dust particles larger than 0.4 μm are captured on the surface or within the first few microns of the structure; sound waves, being oscillating air currents, pass through unimpeded. The anti-static treatment prevents triboelectric charging that would otherwise attract additional dust from the air. The high water contact angle means that any liquid sprayed during cleaning beads up and does not draw dust into the pores. Over time, superficial dust can be wiped off with a dry or slightly damp cloth, restoring like-new performance.
Q1: Can I use a vacuum cleaner or compressed air to clean the membrane?
A: Gentle compressed air (less than 2 bar) from a distance is safe. High vacuum suction directly on the port may deform the membrane—avoid direct contact.
Q2: Does the anti-static coating wear off?
A: The anti-static agent is incorporated into the polymer matrix and is not a surface coating. Its effectiveness is maintained over the product’s life, verified by 2000+ wipe cycles in testing.
Q3: Will the vent affect voice recognition in noisy school or hospital environments?
A: No, the insertion loss is flat across the voice spectrum, so far-field pickup and noise cancellation performance remain identical to an unprotected mic. The vent only removes the dust variable.
Product Highlights
EPTFE Dustproof Acoustic Vent Membrane For Tablet Computer Mic Product Overview Dedicated to tablet computers, this EPTFE dustproof acoustic vent membrane focuses on defending against fine particulate ingress that is prevalent in tablet usage scenarios—classrooms, kitchens, construction sites, and ...
EPTFE Acoustic Vent Membrane Sweatproof For VR Headset Microphone
EPTFE VR Headset Microphone Sweatproof Acoustic Vent Membrane Product Overview This EPTFE acoustic vent membrane is purpose-built for Virtual Reality (VR) headsets, where microphones face constant exposure to sweat, heat, and condensation during physically active gaming and training sessions. The ...
EV Battery Pack Pressure Equalization Vent Bolt Waterproof Breathable Metal Threaded
EV Battery Pack Pressure Equalization Vent Bolt Waterproof Breathable Metal Threaded Product Overview The EV battery pack pressure equalization vent bolt is a critical safety component for electric vehicle battery enclosures. It combines a precision metal threaded body with a waterproof ePTFE ...
Medical Grade EPTFE Miniature Acoustic Vent Membrane For Hearing Aid Devices
Medical Grade EPTFE Miniature Acoustic Vent For Hearing Aid Devices Product Overview This medical-grade EPTFE miniature acoustic vent is purpose-designed for hearing aid devices, where acoustic transparency, biocompatibility, and long-term resistance to cerumen (earwax) and moisture are non...
White EPTFE Acoustic Vent Membrane for Automotive Hands Free Microphone Array
EPTFE Automotive Hands Free Microphone Array Acoustic Vent Membrane Product Overview This EPTFE acoustic vent membrane is specifically designed for in-vehicle hands-free microphone arrays mounted in headliners, overhead consoles, seatbelt assemblies, or integrated into the infotainment system. It ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.